Open, ZZ or 2RS?
The closure governs friction, speed limit and life in dirty environments. All variants and seal materials compared — with clear selection rules.
| Closure | Codes | Added friction | Speed capability | Protects against | Typical use |
|---|---|---|---|---|---|
| Open | — | none | maximum | — | External lubrication (oil bath, gearbox) or clean enclosed environments; relubricatable. |
| Shields | Z / 2Z / ZZ | virtually none | as open | coarse dirt | Motors, fans, dry clean environments; grease-filled, maintenance-free. |
| Non-contact seal | 2RZ / VV / LLB | very low | nearly as open | dust, light moisture | The compromise for high speeds with elevated protection needs. |
| Contact seal | RS / 2RS / DDU / LLU | increased | reduced | dust, splash water | The standard in rough, wet, dusty environments; grease-filled, maintenance-free. |
Seal materials: NBR and FKM
The standard lip material is NBR (nitrile rubber): resistant to mineral oils and greases, usable from about −40 °C to +100 °C, briefly above. FKM (fluoro rubber, e.g. Viton) serves higher temperatures and aggressive media — resistant to roughly +200 °C and many chemicals, but considerably more expensive. Important: above its permissible temperature FKM decomposes into harmful substances; never touch burnt FKM seals unprotected.
Selection rules
Clean and fast: shields (2Z). Wet, dusty, outdoors: contact seals (2RS). High speed with protection needs: non-contact seals (2RZ). Relubrication required: open or single-closure. And as always when replacing: carry over the existing execution including clearance — swapping 2RS for 2Z costs sealing, the reverse costs speed and temperature margin.
