FAG 20222-MB-C3 Tonnenlager (110x200x38)

As a barrel roller bearing, this bearing carries high radial loads and accommodates misalignment. The principal dimensions are 110x200x38 mm at a weight of 5.53 kg; the further technical details are listed in the specification table. This variant features increased radial clearance (C3). Where a self-aligning position also works with a tight fit and a temperature difference between the rings, the increased clearance (C3) absorbs the reduction in operating play.

As with every barrel roller bearing, the single-row set of barrel-shaped rollers aligns itself on the spherical outer raceway and accommodates misalignment and shaft deflection under predominantly radial load. Compared with the standard configuration, the clearance here is increased (C3): an interference fit and a temperature difference between inner and outer ring reduce the mounted clearance, and the larger initial play still keeps the operating clearance within the intended range instead of letting it fall as far as a preloading of the rolling contact.

That is the usual case with a tight inner ring fit, under high load with the corresponding heating, and in drives whose shaft temperature lies well above that of the housing. The open form leaves sealing and lubricant retention to the surrounding construction, whose seal must follow the alignment movement of the bearing. For the design, the fit, the temperature difference between the rings, the misalignment and the radial force should be assessed together.

Solid brass cage — Dimensional/form-fit equivalent — verify suffix-level details for critical applications. Matching suffixes are also listed by SKF (M, MA, MB), NSK (M) and NTN (L1, G1, M).