FAG 234430-M-SP Angular Contact Ball Bearing (150x225x90)
† Catalogue value, not verified
Description
As an axial angular contact ball bearing, this bearing carries high axial loads at elevated speeds, e.g. for ball screws. For this FAG bearing, 150x225x90 mm and a weight of 11 kg apply; the specification table holds the further technical particulars. In its open design this axial angular contact ball bearing stays accessible on both sides and is lubricated and sealed by the surrounding construction.
In the axial angular contact ball bearing the ball raceways sit at a contact angle to the bearing axis; the load line therefore runs at an angle, which yields high longitudinal forces at a higher permissible speed and greater axial stiffness than a flat thrust set. The design is normally run preloaded — often as an adjusted pair or set — because only the preload removes axial play and establishes the stiffness that feed axes and ball screws demand.
The open version has no seal of its own; lubricant supply, sealing and relubrication are handled by the surrounding construction, which eases relubrication intervals and installation in enclosed housings. Without seal friction the frictional torque stays low, so the power loss follows essentially from the preload and the quantity of lubricant.
Standard bearing steel is through-hardened and covers the usual operating-temperature range; for the design, axial force, preload, speed and the required stiffness should be assessed together. Solid brass cage — Dimensional/form-fit equivalent — verify suffix-level details for critical applications. Matching suffixes are also listed by SKF (M, MA, MB), NSK (M) and NTN (L1, G1, M).
FAG 234430-M-SP Angular Contact Ball Bearing (150x225x90)
— 150 x 225 x 90 mm
Response within 4 business hours
Same size — other brands
Bearings of the same type with identical dimensions 150 × 225 × 90 mm — please check sealing, clearance and execution.
Keine markenübergreifende Entsprechung mit verfügbaren Artikeln.
Same dimensions means the same bearing type and matching main dimensions (d × D × B). Sealing, cage, internal clearance and execution (e.g. material, precision, grease fill) are encoded in the suffix and may differ — please check before ordering.
| Product | Brand | Price | Availability | ||
|---|---|---|---|---|---|
| SKF BTW150 CM/SP Angular Contact Ball Bearing (150x225x90) | SKF | €1,928.44 | In stock | ||
Frequently asked questions
What are the dimensions of the FAG 234430-M-SP Schrägkugellager (150x225x90)?
Who is the manufacturer of the FAG 234430-M-SP Schrägkugellager (150x225x90)?
How heavy is the FAG 234430-M-SP Schrägkugellager (150x225x90)?
What seal type does the FAG 234430-M-SP Schrägkugellager (150x225x90) have?
What bearing type is the FAG 234430-M-SP Schrägkugellager (150x225x90)?
Guides for this product
- KnowledgeSpindellager und Hochpräzisionslager verstehenSpindellager erklärt: Vorspannung, O-/X-/Tandem-Anordnung, ISO-492-Toleranzklassen 6/5/4/2 und SP sowie das Entschlüsseln der Lagerbezeichnung.
- GuideVorspannung L, M oder H – welche Klasse?Vorspannung L, M oder H bei Spindellagern wählen: leicht für hohe Drehzahl, hoch für maximale Steifigkeit. Codes sind herstellerabhängig (NSK vs. FAG).
- GuideTandem, O- oder X-Anordnung – wann welche?O- (DB), X- (DF) oder Tandem (DT) bei Schrägkugellagern: Entscheidungslogik nach Lastrichtung, Momentensteifigkeit, Fluchtungstoleranz und Wärmeverhalten.
