INA ZKLF40100-2RS-2AP-XL = 2 pcs. Schrägkugellager (40x100x68)

As an axial angular contact ball bearing, this bearing carries high axial loads at elevated speeds, e.g. for ball screws. The principal dimensions are 40x100x68 mm at a weight of 2.833 kg; the further technical details are listed in the specification table. The axial angular contact ball bearing is built for axial load with high running accuracy — the inclined contact line makes the position axially stiff.

The balls run between washers whose raceways are inclined so that the line of force action is predominantly axial. The position therefore takes axial load with high stiffness and holds the shaft closely in place — the reason this type is used where the accuracy of axial guidance decides the function of the whole assembly. It carries only a small amount of radial load, so an adjacent radial position belongs to the design.

Achievable stiffness depends directly on the setting, either adjusted on assembly or fixed by the design. Flatness and squareness of the seating faces are critical in axial types, because a tilted seat translates directly into uneven load distribution across the ball set. Rings and rolling elements are made of through-hardened standard bearing steel.