NKE K81128-TVPB Cylindrical Roller and Cage Thrust Assembly (140x178x12)
Description
As an axial cylindrical roller and cage assembly, this component forms the axial load-carrying roller set and supports very high axial loads. This NKE bearing measures 140x178x12 mm and weighs 0.4 kg; the specification table carries the supplementary technical details. The axial cylindrical roller and cage assembly is the rolling element set alone: rollers and cage in standard bearing steel, without washers of its own.
The axial cylindrical roller and cage assembly consists solely of rollers and a cage; it brings no raceway with it but presupposes one in the surrounding design. The adjoining faces must therefore be hardened, ground and square to the axis — otherwise thrust washers should be provided, which take on the same task as a replaceable part. Dispensing with washers of its own gives the smallest possible axial section height and allows a load-carrying face of the design to be used directly as a raceway.
As with every axial roller arrangement, the roller slides relative to the raceway along its length, which is why speed, lubricant film and heat dissipation must be considered together and a minimum axial force should be present. Standard bearing steel provides the required rolling element hardness after heat treatment; for the design, the hardness and quality of the mating raceway faces matter as much as the rating of the assembly itself.
NKE K81128-TVPB Cylindrical Roller and Cage Thrust Assembly (140x178x12)
— 140 x 178 x 12 mm
Response within 4 business hours
