This NSK bearing measures 35x72x17 mm and weighs 0.284 kg; the specification table carries the supplementary technical details. This variant features a contact seal. The open opposite side remains the access to the rolling chamber: lubricant can be supplied and renewed in service, while the sealed side blocks ingress from outside. This version applies the selectivity of a contact seal exactly where it is needed and leaves the opposite side open.
On the closed side an elastomeric lip bears against a shoulder or in a groove of the inner ring; it is this contact that turns a restriction into a barrier which also keeps out splash water, spray mist and fine dust — an effect a non-contacting shield does not achieve. On the open side the rolling chamber remains accessible, so lubricant from the surrounding space reaches the rolling contact, frictional heat can be carried away with it and relubrication through the assembly remains possible; the position is thereby not committed to an enclosed grease charge dimensioned for the service life.
The price of the contact arises on one side only: the load-independent frictional torque and the heat source it creates at the inner ring occur at one lip instead of two, so breakaway torque, no-load loss and permissible speed lie between the doubly sealed and the open version. The mounting instruction follows from the asymmetry: the seal faces the loaded surroundings, the open side the clean interior, and a reversed position inverts this assignment without being noticeable during assembly.
The lip is a wearing part whose barrier effect declines over operating time with circumferential speed, temperature and medium. Normal radial clearance is matched to one interference-fitted ring and a moderate temperature gradient, whereby the frictional heat of the single lip is to be attributed to the inner ring. Through-hardened standard bearing steel sets the frame for the ratings listed in the catalogue; the temperature limit of the sealing material is to be taken from the designation.
ManufacturerNSK
Bearing typeDeep-groove ball bearings
Bore d35 mm
Outer Ø D72 mm
Width B17 mm
Dyn. load C25.663 kN(Catalogue value, not verified)
Stat. load C₀15.227 kN(Catalogue value, not verified)
Limiting speed11,000 min⁻¹(Catalogue value, not verified)
Reference speed9,400 min⁻¹(Catalogue value, not verified)
Weight0.284 kg
Sealscontact seal on one side
Clearancenormal radial internal clearance
Cagepressed steel cage
Materialstandard bearing steel
Tolerancetolerance class P0/PN (ABEC 1)
Bore typecylindrical bore
€6.78/ pc€12.26−45 %
incl. VAT, plus shipping · price drops with quantity
Lowest price in the 30 days before the reduction: €12.26
In stock
Typically ready to ship in 1–2 days
In stock · ships via DPD, UPS or Deutsche Post
QtyUnit priceDisc.
1 – 4€6.78—
5 – 9€6.58−3 %
10 – 24€6.44−5 %
25 – 49€6.24−8 %
50 – 99€6.10−10 %
4 more for −3% volume discount
From 100 pcs: price and lead time on request – subject to review.
Total (1 pc)€6.78
NSK 6207 DU Kugellager (35x72x17)
— 35 x 72 x 17 mm
Response within 4 business hours
✓Free shipping over €100 · 14-day returns
✓Purchase on invoice – first order paid before dispatch, then 14-day terms for approved business customers
Same dimensions means the same bearing type and matching main dimensions (d × D × B). Sealing, cage, internal clearance and execution (e.g. material, precision, grease fill) are encoded in the suffix and may differ — please check before ordering. Equivalent additionally means the same sealing, internal clearance and tolerance class; the cage and other suffix features (e.g. lubrication groove) may differ.
