NTN 22207 EAW33C4 Spherical Roller Bearing (35x72x23)
† Catalogue value, not verified
Description
As a spherical roller bearing, this bearing carries very high radial and axial loads and accommodates misalignment. The principal dimensions are 35x72x23 mm at a weight of 0.403 kg; the further technical details are listed in the specification table. This variant features greatly increased radial clearance (C4). For heavy, hot-running arrangements the design quantity is not the initial clearance but what is left of it after fitting and heating.
Strongly increased clearance (C4) differs from the standard configuration in the initial radial play alone; the rolling geometry, the alignment capability and the load-carrying behaviour of the two-row roller set stay the same. The need arises where several consumers of that same play occur at once. On a tapered seating surface a heavy arrangement calls for a long drive-up distance so that the inner ring grips the shaft or the adapter sleeve securely, and every millimetre travelled expands the ring.
If the bearing position additionally runs under a sustained heat flow from the process side — on dryers, ovens, drums or hot-running drives — the inner ring expands more than the cooler outer ring and consumes further play. Were a standard clearance used in that situation, the roller set would go into preload before the plant had even reached its operating temperature.
The reverse side shows in the cold state: the bearing then runs with noticeable play, the load zone is narrow, and the most heavily loaded roller takes a larger share of the radial force than it would with a close clearance. At bearing positions with low load, vibration or frequent standstills this has to be checked, because a roller set that is too lightly loaded slides instead of rolling.
Rings and rolling elements are made of through-hardened standard bearing steel; above the usual operating temperature range the dimensional stabilisation of the material has to be considered as well. The open form leaves sealing and relubrication to the surrounding construction, which at high temperatures also carries part of the heat dissipation.
NTN 22207 EAW33C4 Spherical Roller Bearing (35x72x23)
— 35 x 72 x 23 mm
Response within 4 business hours
Same size — other brands
Bearings of the same type with identical dimensions 35 × 72 × 23 mm — please check sealing, clearance and execution.
multiple variants for this number — please select
This designation exists in several variants. Please pick the matching one.
Same dimensions means the same bearing type and matching main dimensions (d × D × B). Sealing, cage, internal clearance and execution (e.g. material, precision, grease fill) are encoded in the suffix and may differ — please check before ordering.
| Product | Brand | Price | Availability | ||
|---|---|---|---|---|---|
| FAG 22207-E1-XL-C4 Spherical Roller Bearing (35x72x23) | FAG | €46.28 | In stock | ||
| SKF 22207 E/C4 Spherical Roller Bearing (35x72x23) | SKF | €55.41 | In stock | ||
| NACHI 22207 EXQW33C3 Spherical Roller Bearing (35x72x23) | NACHI | €43.34 | In stock | ||
| FAG 22207-E1-XL Spherical Roller Bearing (35x72x23) | FAG | €43.99 | In stock | ||
| FAG 22207-E1-XL-C3 Spherical Roller Bearing (35x72x23) | FAG | €43.99 | In stock | ||
Frequently asked questions
What are the dimensions of the NTN 22207 EAW33C4 Pendelrollenlager (35x72x23)?
Who is the manufacturer of the NTN 22207 EAW33C4 Pendelrollenlager (35x72x23)?
How heavy is the NTN 22207 EAW33C4 Pendelrollenlager (35x72x23)?
What seal type does the NTN 22207 EAW33C4 Pendelrollenlager (35x72x23) have?
What bearing type is the NTN 22207 EAW33C4 Pendelrollenlager (35x72x23)?
Guides for this product
- GuideC3 oder C4 Lagerluft – wann welche?C3 oder C4 Lagerluft? Entscheidungshilfe nach Temperaturdifferenz, Festsitz und Drehzahl – damit das Betriebsspiel nicht negativ wird. Mit Auswahllogik.
- GuideWie verändert sich die Lagerluft bei Erwärmung?Erwärmung verkleinert die Lagerluft. So wird aus der Initiallagerluft das kleinere Betriebsspiel – und so wählen Sie die richtige Lagerluftklasse.
- GuideWann ein Pendelrollenlager?Pendelrollenlager wählen, wenn schwere Radiallast auf Wellenschiefstellung trifft: winkeleinstellbar plus stoßfest. Entscheidungslogik und Abgrenzung.
