At 40x80x18 mm and a unit weight of 0.366 kg, the installation envelope is fixed; further technical details are held in the specification table. Because the shield does not touch the rings, the permissible speed of this version lies close to that of the open form — the limit is set by the cage and the lubricant, not by the shield. The shield is a sheet-metal part fixed in the outer ring that reaches close to a shoulder of the inner ring without touching it.
The whole character of the version follows from this geometry: the remaining gap holds back coarse contamination and keeps the grease charge in the rolling chamber, yet generates neither an additional frictional torque nor a heat source, so that breakaway torque, no-load losses and permissible speed stay close to those of an open version.
The price lies in the selectivity: a gap lets water, vapour and fine dust through, and where the position is exposed to such media, either a contact version or an upstream seal in the design is to be provided. Since the shields are fixed in the outer ring, the grease charge is part of the delivered condition and is dimensioned for the service life; the life of that charge — rather than material fatigue — is frequently the limiting quantity at moderate load, and it depends directly on the operating temperature and the speed of the position.
Normal radial clearance is matched to one interference-fitted ring and a moderate temperature difference between inner and outer ring; because the shields do not touch the rings, they exert no influence on the clearance themselves. During mounting it has to be observed that the fitting force is introduced through the ring carrying the interference fit: a force routed through the outer ring, or a heavily compressed housing bore, can deform the shield in its seat and close the gap.
Through-hardened standard bearing steel sets the temperature and load frame within which the ratings listed in the catalogue apply.
ManufacturerNTN
Bearing typeDeep-groove ball bearings
Bore d40 mm
Outer Ø D80 mm
Width B18 mm
Dyn. load C32.5 kN(Catalogue value, not verified)
Stat. load C₀17.8 kN(Catalogue value, not verified)
Limiting speed10,000 min⁻¹(Catalogue value, not verified)
Reference speed8,700 min⁻¹(Catalogue value, not verified)
Weight0.366 kg
Sealsshields on both sides
Clearancenormal radial internal clearance
Cagepressed steel cage
Materialstandard bearing steel
Tolerancetolerance class P0/PN (ABEC 1)
Bore typecylindrical bore
€11.60/ pc
incl. VAT, plus shipping · price drops with quantity
In stock
Typically ready to ship in 1–2 days
In stock · ships via DPD, UPS or Deutsche Post
QtyUnit priceDisc.
1 – 4€11.60—
5 – 9€11.25−3 %
10 – 24€11.02−5 %
25 – 49€10.67−8 %
50 – 99€10.44−10 %
4 more for −3% volume discount
From 100 pcs: price and lead time on request – subject to review.
Total (1 pc)€11.60
NTN 6208 ZZ/5K Kugellager (40x80x18)
— 40 x 80 x 18 mm
Response within 4 business hours
✓Free shipping over €100 · 14-day returns
✓Purchase on invoice – first order paid before dispatch, then 14-day terms for approved business customers
Same dimensions means the same bearing type and matching main dimensions (d × D × B). Sealing, cage, internal clearance and execution (e.g. material, precision, grease fill) are encoded in the suffix and may differ — please check before ordering. Equivalent additionally means the same sealing, internal clearance and tolerance class; the cage and other suffix features (e.g. lubrication groove) may differ.
