NTN K89307 Cylindrical Roller and Cage Thrust Assembly (35x68x6)
Description
As an axial cylindrical roller and cage assembly, this component forms the axial load-carrying roller set and supports very high axial loads. This NTN bearing measures 35x68x6 mm and weighs 0.066 kg; the specification table carries the supplementary technical details. The axial cylindrical roller and cage assembly is the rolling element set alone: rollers and cage in standard bearing steel, without washers of its own.
The axial cylindrical roller and cage assembly consists solely of rollers and a cage; it brings no raceway with it but presupposes one in the surrounding design. The adjoining faces must therefore be hardened, ground and square to the axis — otherwise thrust washers should be provided, which take on the same task as a replaceable part. Dispensing with washers of its own gives the smallest possible axial section height and allows a load-carrying face of the design to be used directly as a raceway.
As with every axial roller arrangement, the roller slides relative to the raceway along its length, which is why speed, lubricant film and heat dissipation must be considered together and a minimum axial force should be present. Standard bearing steel provides the required rolling element hardness after heat treatment; for the design, the hardness and quality of the mating raceway faces matter as much as the rating of the assembly itself.
NTN K89307 Cylindrical Roller and Cage Thrust Assembly (35x68x6)
— 35 x 68 x 6 mm
Response within 4 business hours
