SKF 206-Z Ball Bearing (30x62x16)
Description
✓ verified catalog valuesThe dynamic load rating of 22.9 kN characterises this bearing. The static load rating is 17.3 kN. The limiting speed is 12000 rpm. A single shield holds the grease charge back on one side only; with a vertical shaft or under centrifugal action it must therefore be checked in which direction the lubricant migrates. The single shield turns an otherwise symmetrical bearing into a directional component, and most of what has to be observed with this version follows from that.
On the closed side a sheet-metal part fixed in the outer ring reaches close to a shoulder of the inner ring without touching it; the remaining gap holds back coarse contamination and in doing so generates neither a frictional torque nor a heat source. On the open side the rolling chamber remains accessible: lubricant from the surrounding space can reach the rolling contact, frictional heat can be carried away with it, and relubrication through the assembly is possible in principle — properties that a doubly closed version does not offer.
The mounting direction is thereby part of the design and not left to the assembly floor: the shield faces the loaded surroundings, the open side faces the clean interior supplied with lubricant. Two further points hang on the same asymmetry. First, the grease charge is held back on one side only, so with a vertical shaft, high speed or heavy vibration it has to be checked whether the lubricant remains in the rolling chamber.
Second, the gap is no barrier against liquid or fine dust, so for wet surroundings a contact version or an upstream seal is to be provided. Normal radial clearance is matched to one interference-fitted ring and a moderate temperature difference; because the shield does not touch the rings, it exerts no influence on the clearance itself. Through-hardened standard bearing steel sets the temperature and load frame of the rings.
Metal shield on one side — Dimensional/form-fit equivalent — verify suffix-level details for critical applications. Matching suffixes are also listed by FAG (Z), NSK (Z), NTN (Z) and NACHI (ZE).
SKF 206-Z Ball Bearing (30x62x16)
— 30 x 62 x 16 mm
Response within 4 business hours
Same size — other brands
Bearings of the same type with identical dimensions 30 × 62 × 16 mm — please check sealing, clearance and execution.
Same dimensions means the same bearing type and matching main dimensions (d × D × B). Sealing, cage, internal clearance and execution (e.g. material, precision, grease fill) are encoded in the suffix and may differ — please check before ordering.
| Product | Brand | Price | Availability | ||
|---|---|---|---|---|---|
| FAG 6206-Z Ball Bearing (30x62x16) | FAG | €6.32 | In stock | ||
| NACHI 6206 ZEC3 Ball Bearing (30x62x16) | NACHI | €4.61 | In stock | ||
| NACHI 6206 ZECM Ball Bearing (30x62x16) | NACHI | €4.61 | In stock | ||
| FAG 6206-Z-C3 Ball Bearing (30x62x16) | FAG | €5.01 | In stock | ||
| FAG 6206-C-Z-C3 (-Z-C3) Ball Bearing (30x62x16) | FAG | €6.89 | In stock | ||
Frequently asked questions
What are the dimensions of the SKF 206-Z Kugellager (30x62x16)?
Who is the manufacturer of the SKF 206-Z Kugellager (30x62x16)?
How heavy is the SKF 206-Z Kugellager (30x62x16)?
What seal type does the SKF 206-Z Kugellager (30x62x16) have?
What bearing type is the SKF 206-Z Kugellager (30x62x16)?
Guides for this product
- GuideWas bedeutet -2RS / -2RSR / -2Z?2RS, 2RSR und 2Z entschlüsselt: berührende Dichtung gegen Deckscheibe – wann welche Abdichtung für Staub, Feuchte, Drehzahl und Reibung sinnvoll ist.
- GuideRillenkugellager oder Schrägkugellager?Rillenkugellager (DGBB) oder Schrägkugellager (ACBB)? Entscheidung nach Lastrichtung, Steifigkeit, Drehzahl und Kosten – mit klarer Auswahllogik.
