SKF 6000-2RZTN9/C3LHT23 Ball Bearing (10x26x8)
Description
At 10x26x8 mm and a unit weight of 0.018 kg, the installation envelope is fixed; further technical details are held in the specification table. This variant features increased radial clearance (C3). The shares deducted from the mounted clearance are manageable in this version: the interference fit and the heat flow supplied from outside, with no contribution from the sealing.
This combination stands out in that its two features act independently of one another, which simplifies the design work. The non-contact seal follows the contour of the inner ring with an elastomeric sealing body down to a narrow distance without touching it: no load-independent frictional torque arises, no heat source at the inner ring and no wearing contact point, so the permissible speed lies close to that of the open form and the barrier effect is retained over the operating period.
Increased clearance (C3) holds an allowance ready for the shares that consume the mounted clearance in service — the interference fit on the shaft and the temperature gradient between a warmer inner ring and an outer ring coupled through the housing. Because the sealing takes no part in that gradient, it originates here in the surroundings of the position: in a hot shaft, an adjacent process or the power lost in a fast-running drive.
That makes the estimate of the residual clearance in the warm running state more direct than in a version sealing by contact, where part of the warming arises inside the bearing itself. It remains to be observed that the gap does not permanently hold back liquid and very fine dust, and that the grease charge is enclosed and dimensioned for the service life, so its ageing at the elevated operating temperature can become the limiting quantity.
At low radial load the wider clearance has to be taken into account, because the load zone turns out narrower. Through-hardened standard bearing steel sets the frame for hardness and dimensional accuracy; the temperature limit of the sealing material is to be taken separately from the designation.
SKF 6000-2RZTN9/C3LHT23 Ball Bearing (10x26x8)
— 10 x 26 x 8 mm
Response within 4 business hours
Same size — other brands
Bearings of the same type with identical dimensions 10 × 26 × 8 mm — please check sealing, clearance and execution.
Same dimensions means the same bearing type and matching main dimensions (d × D × B). Sealing, cage, internal clearance and execution (e.g. material, precision, grease fill) are encoded in the suffix and may differ — please check before ordering. Equivalent additionally means the same sealing, internal clearance and tolerance class; the cage and other suffix features (e.g. lubrication groove) may differ.
| Product | Brand | Match | Price | Availability | ||
|---|---|---|---|---|---|---|
| NACHI 6000-2NKE9C3 Ball Bearing (10x26x8)Same dimensions | NACHI | Same dimensions | €2.87 | In stock | ||
| NACHI 6000-2NKE9CM Ball Bearing (10x26x8)Same dimensions | NACHI | Same dimensions | €2.87 | In stock | ||
| ZEN 6000-2RS-C3 Ball Bearing (10x26x8)Same dimensions | ZEN | Same dimensions | €1.31 | In stock | ||
| SKF 6000/C3 Ball Bearing (10x26x8)Same dimensions | SKF | Same dimensions | €1.71 | In stock | ||
| FAG 6000-C-C3 (-C3) Ball Bearing (10x26x8)Same dimensions | FAG | Same dimensions | €1.87 | In stock | ||
Frequently asked questions
What are the dimensions of the SKF 6000-2RZTN9/C3LHT23 Kugellager (10x26x8)?
Who is the manufacturer of the SKF 6000-2RZTN9/C3LHT23 Kugellager (10x26x8)?
How heavy is the SKF 6000-2RZTN9/C3LHT23 Kugellager (10x26x8)?
What seal type does the SKF 6000-2RZTN9/C3LHT23 Kugellager (10x26x8) have?
What bearing type is the SKF 6000-2RZTN9/C3LHT23 Kugellager (10x26x8)?
Guides for this product
- GuideC3 oder C4 Lagerluft – wann welche?C3 oder C4 Lagerluft? Entscheidungshilfe nach Temperaturdifferenz, Festsitz und Drehzahl – damit das Betriebsspiel nicht negativ wird. Mit Auswahllogik.
- GuideWie verändert sich die Lagerluft bei Erwärmung?Erwärmung verkleinert die Lagerluft. So wird aus der Initiallagerluft das kleinere Betriebsspiel – und so wählen Sie die richtige Lagerluftklasse.
- GuideWas bedeutet -2RS / -2RSR / -2Z?2RS, 2RSR und 2Z entschlüsselt: berührende Dichtung gegen Deckscheibe – wann welche Abdichtung für Staub, Feuchte, Drehzahl und Reibung sinnvoll ist.
