The dynamic load rating of 13.5 kN characterises this bearing. The static load rating is 6.55 kN. The limiting speed is 10000 rpm. This variant features extra-large radial clearance (C5). Very strongly increased clearance (C5) belongs at positions where a sustained temperature gradient between the rings consumes the greater part of the mounted clearance — on heated rolls, dryer sections or furnace equipment, for instance.
Very strongly increased clearance (C5) is the widest of the listed clearance classes, and it is not chosen for the fit alone but because heat is permanently supplied to the position from the inside. Where the inner ring is held at temperature by a hot shaft or a heated component while the outer ring cools through the housing, the inner ring expands permanently further, and the difference is taken directly out of the clearance.
If this allowance is set too small, the rolling contact is preloaded, the frictional torque rises, and the heat thereby generated closes the remaining clearance further — a course of events that reinforces itself. The opposite direction has to be assessed as well: in the cold state and at low radial load the full clearance is present, the load zone is narrow, and the ball set can slide on start-up before the operating temperature has established itself.
The open form suits this application picture, because heat removal can take place through the lubricant and the position is not tied to the temperature limit of a sealing material supplied with the bearing. The lubricant itself remains to be checked: it must withstand the same temperature that prompted the choice of clearance class, and relubrication intervals are to be set against that temperature rather than against a catalogue reference value.
Through-hardened standard bearing steel retains its hardness and dimensional accuracy only within the range stated for the series; whether a position may be operated above it is to be taken from the designation and the dimensional stabilisation data, and is not to be inferred from the clearance class.
ManufacturerSKF
Bearing typeDeep-groove ball bearings
Bore d20 mm
Outer Ø D47 mm
Width B14 mm
Dyn. load C13.5 kN
Stat. load C₀6.55 kN
Fatigue limit Pu0.28 kN
Limiting speed10,000 min⁻¹
Reference speed32,000 min⁻¹
Weight0.102 kg
Sealsnone (open bearing)
Clearanceradial internal clearance very much greater than normal
Cagepressed steel cage
Materialstandard bearing steel
Tolerancetolerance class P0/PN (ABEC 1)
Shaft shoulder dₐ25.6–28.8 mm
Housing shoulder Dₐ38.5–41.4 mm
Bore typecylindrical bore
€5.51/ pc€9.02−39 %
incl. VAT, plus shipping · price drops with quantity
Lowest price in the 30 days before the reduction: €9.02
In stock
Typically ready to ship in 1–2 days
In stock · ships via DPD, UPS or Deutsche Post
QtyUnit priceDisc.
1 – 4€5.51—
5 – 9€5.35−3 %
10 – 24€5.23−5 %
25 – 49€5.07−8 %
50 – 99€4.96−10 %
4 more for −3% volume discount
From 100 pcs: price and lead time on request – subject to review.
Total (1 pc)€5.51
SKF 6204/C5 Kugellager (20x47x14)
— 20 x 47 x 14 mm
Response within 4 business hours
✓Free shipping over €100 · 14-day returns
✓Purchase on invoice – first order paid before dispatch, then 14-day terms for approved business customers
Same dimensions means the same bearing type and matching main dimensions (d × D × B). Sealing, cage, internal clearance and execution (e.g. material, precision, grease fill) are encoded in the suffix and may differ — please check before ordering. Equivalent additionally means the same sealing, internal clearance and tolerance class; the cage and other suffix features (e.g. lubrication groove) may differ.
