The dynamic load rating of 14.8 kN characterises this bearing. The static load rating is 7.8 kN. The limiting speed is 18000 rpm. This version sits between the open and the doubly closed variant: protection against coarse ingress from one side, access to the rolling chamber from the other. The single shield turns an otherwise symmetrical bearing into a directional component, and most of what has to be observed with this version follows from that.
On the closed side a sheet-metal part fixed in the outer ring reaches close to a shoulder of the inner ring without touching it; the remaining gap holds back coarse contamination and in doing so generates neither a frictional torque nor a heat source. On the open side the rolling chamber remains accessible: lubricant from the surrounding space can reach the rolling contact, frictional heat can be carried away with it, and relubrication through the assembly is possible in principle — properties that a doubly closed version does not offer.
The mounting direction is thereby part of the design and not left to the assembly floor: the shield faces the loaded surroundings, the open side faces the clean interior supplied with lubricant. Two further points hang on the same asymmetry. First, the grease charge is held back on one side only, so with a vertical shaft, high speed or heavy vibration it has to be checked whether the lubricant remains in the rolling chamber.
Second, the gap is no barrier against liquid or fine dust, so for wet surroundings a contact version or an upstream seal is to be provided. Normal radial clearance is matched to one interference-fitted ring and a moderate temperature difference; because the shield does not touch the rings, it exerts no influence on the clearance itself. Through-hardened standard bearing steel sets the temperature and load frame of the rings.
Metal shield on one side — Dimensional/form-fit equivalent — verify suffix-level details for critical applications. Matching suffixes are also listed by FAG (Z), NSK (Z), NTN (Z) and NACHI (ZE).
ManufacturerSKF
Bearing typeDeep-groove ball bearings
Bore d25 mm
Outer Ø D52 mm
Width B15 mm
Dyn. load C14.8 kN
Stat. load C₀7.8 kN
Fatigue limit Pu0.335 kN
Limiting speed18,000 min⁻¹
Reference speed28,000 min⁻¹
Weight0.127 kg
Sealsshield on one side
Clearancenormal radial internal clearance
Cagepressed steel cage
Materialstandard bearing steel
Tolerancetolerance class P0/PN (ABEC 1)
Shaft shoulder dₐ30.6–34.4 mm
Housing shoulder Dₐ44–46.4 mm
Bore typecylindrical bore
€4.94/ pc€10.47−53 %
incl. VAT, plus shipping · price drops with quantity
Lowest price in the 30 days before the reduction: €10.47
In stock
Typically ready to ship in 1–2 days
In stock · ships via DPD, UPS or Deutsche Post
QtyUnit priceDisc.
1 – 4€4.94—
5 – 9€4.79−3 %
10 – 24€4.69−5 %
25 – 49€4.54−8 %
50 – 99€4.44−10 %
4 more for −3% volume discount
From 100 pcs: price and lead time on request – subject to review.
Total (1 pc)€4.94
SKF 6205-Z Kugellager (25x52x15)
— 25 x 52 x 15 mm
Response within 4 business hours
✓Free shipping over €100 · 14-day returns
✓Purchase on invoice – first order paid before dispatch, then 14-day terms for approved business customers
Same dimensions means the same bearing type and matching main dimensions (d × D × B). Sealing, cage, internal clearance and execution (e.g. material, precision, grease fill) are encoded in the suffix and may differ — please check before ordering. Equivalent additionally means the same sealing, internal clearance and tolerance class; the cage and other suffix features (e.g. lubrication groove) may differ.
