SKF YAT205/VP076 Spannlager (25x52x27,2)

As an insert (Y) bearing, this bearing is located on the shaft and used in a housing. The principal dimensions are 25x52x27.2 mm at a weight of 0.158 kg; the further technical details are listed in the specification table. The spherical outer ring is what defines this type — it lets the bearing position align itself as it is tightened. An insert bearing combines two things: a wide inner ring locked onto a plain shaft, and a spherical outer ring that can swivel in its housing.

The position therefore absorbs the alignment error that is unavoidable when mounting to sheet metal, castings or welded frames — the type exists for applications where the surrounding structure offers no raceway quality. Depending on the version the inner ring is secured by grub screws, an eccentric locking collar or an adapter sleeve; what matters is that the shaft is clean and to size in the seating area, because the ring draws its entire grip from that joint.

The swivel is for alignment on assembly, not for running: a misalignment that rotates continuously works the seal and shortens life. The shields on both sides run without contact: they hold back coarse contamination and keep the lubricant in, adding no frictional torque — but they do not protect against splash water or fine dust. Rings and rolling elements are made of through-hardened standard bearing steel.