STC-Steyr 29484 E.M Spherical Roller Thrust Bearing (420x730x185)
Description
As a spherical roller thrust bearing, this bearing carries high axial and moderate radial loads and accommodates misalignment. The mounting dimensions are 420x730x185 mm and the weight is 325 kg; technical details beyond these are shown in the specification table. Because the rollers run at an angle to the bearing axis, a radial component arises alongside the axial load-carrying action and must be allowed for in the surrounding design.
The spherical roller thrust bearing carries load through barrel-shaped rollers that run at an angle to the bearing axis between a flat shaft washer and a spherical housing washer. Two properties follow from this geometry at once: the roller set can swivel within the spherical raceway and thereby accommodates alignment errors and shaft deflection, and the angled position allows a limited radial share to be taken alongside very high longitudinal forces.
At the same time the contact angle produces a radial reaction force under axial load, which the surrounding design must support. A permanently acting minimum axial force keeps the roller set in rolling contact; the design is typically grease-lubricated or run in oil-lubricated housings, because the friction power has to be carried away under high load.
Standard bearing steel is through-hardened and covers the usual operating-temperature range; for the design, axial force, radial share, misalignment and lubrication should be assessed together.
STC-Steyr 29484 E.M Spherical Roller Thrust Bearing (420x730x185)
— 420 x 730 x 185 mm
Response within 4 business hours
