STC-Steyr 61896 MB Kugellager (480x600x56)

The principal dimensions are 480x600x56 mm at a weight of 36.5 kg; the further technical details are listed in the specification table. Point contact between ball and raceway keeps frictional torque low, which is why this type runs faster and cooler than any other rolling bearing. The deep, closely conforming raceway grooves in the inner and outer ring capture the balls positively, so the bearing takes radial load and moderate axial load in both directions without a second bearing position to oppose it.

Because the ball touches the raceway at a point, friction and heat stay low — the precondition for high speeds and for grease-for-life designs. The limits follow from that same geometry: the small contact area caps load capacity against a roller bearing of equal size, and the bearing tolerates misalignment within narrow limits only, since angular error transfers straight into the raceway grooves.

Seats in shaft and housing must therefore be aligned and geometrically accurate; where shaft deflection is expected, a self-aligning type belongs in that position. The open version leaves sealing, initial filling and relubrication to the surrounding design, while keeping the rolling chamber accessible for a directed supply of lubricant. The normal radial clearance recorded corresponds to the standard class and suits ordinary fits and temperature conditions.