UKF UK80 .A16.1/2 Separable Ball Bearing (80x125x27)
Description
As a separable (magneto) ball bearing, this bearing allows the inner and outer rings to be mounted separately. The principal dimensions are 80x125x27 mm at a weight of 1.21 kg; the further technical details are listed in the specification table. In the separable ball bearing, one shoulder of the outer ring is removed, so the outer ring and the inner ring with its ball set can be drawn apart.
The separable ball bearing is a single-row angular contact ball bearing in which one shoulder of the outer ring is omitted; the outer ring and the inner ring with its ball set thereby form two separately handleable parts. The application profile follows from that separability: both rings can be fitted with an interference fit and the shaft and housing sections mounted independently of each other, which eases confined installation spaces and the series assembly of small drives.
Because one shoulder is absent, axial force is supported in one direction only; the bearing therefore works against a second bearing adjusted against it, and only that adjustment sets the axial play and preload of the shaft. The open form has no seal of its own, so sealing, initial filling and relubrication fall to the surrounding construction and the frictional torque stays low.
Standard bearing steel is through-hardened; for the design, the radial and axial shares, the adjustment of the bearing pair and the fits should be assessed together.
UKF UK80 .A16.1/2 Separable Ball Bearing (80x125x27)
— 80 x 125 x 27 mm
Response within 4 business hours
