The dynamic load rating of 8.9 kN characterises this bearing. The static load rating is 3.75 kN. The deep groove ball bearing is the most widely built rolling bearing type, and the reason is how little it asks: it carries radial load, supports moderate axial load in both directions, and demands little of the surrounding design. The deep, closely conforming raceway grooves in the inner and outer ring capture the balls positively, so the bearing takes radial load and moderate axial load in both directions without a second bearing position to oppose it.
Because the ball touches the raceway at a point, friction and heat stay low — the precondition for high speeds and for grease-for-life designs. The limits follow from that same geometry: the small contact area caps load capacity against a roller bearing of equal size, and the bearing tolerates misalignment within narrow limits only, since angular error transfers straight into the raceway grooves.
Seats in shaft and housing must therefore be aligned and geometrically accurate; where shaft deflection is expected, a self-aligning type belongs in that position. The single shield runs without contact and holds back coarse contamination on its side; the open opposite side is left to the surrounding design, which seals it there or supplies the lubricant.
Polyamide cage (glass-fiber reinforced) — Dimensional/form-fit equivalent — verify suffix-level details for critical applications. Matching suffixes are also listed by SKF (TN9, ETN9), NSK (T) and NTN (T2).
ManufacturerFAG
Bearing typeDeep-groove ball bearings
Bore d15 mm
Outer Ø D35 mm
Width B11 mm
Dyn. load C8.9 kN
Stat. load C₀3.75 kN
Weight0.041 kg
Sealsshield on one side
Cagepolyamide cage
Shaft shoulder dₐ19.2–21.7 mm
Housing shoulder Dₐ29–30.8 mm
Bore typecylindrical bore
€3.47/ pc€4.65−25 %
incl. VAT, plus shipping · price drops with quantity
Lowest price in the 30 days before the reduction: €4.65
In stock
Typically ready to ship in 1–2 days
In stock · ships via DPD, UPS or Deutsche Post
QtyUnit priceDisc.
1 – 4€3.47—
5 – 9€3.37−3 %
10 – 24€3.30−5 %
25 – 49€3.19−8 %
50 – 99€3.12−10 %
4 more for −3% volume discount
From 100 pcs: price and lead time on request – subject to review.
Total (1 pc)€3.47
FAG 6202-C-Z-TVH-C2 Kugellager (15x35x11)
— 15 x 35 x 11 mm
Response within 4 business hours
✓Free shipping over €100 · 14-day returns
✓Purchase on invoice – first order paid before dispatch, then 14-day terms for approved business customers
Same dimensions means the same bearing type and matching main dimensions (d × D × B). Sealing, cage, internal clearance and execution (e.g. material, precision, grease fill) are encoded in the suffix and may differ — please check before ordering. Equivalent additionally means the same sealing, internal clearance and tolerance class; the cage and other suffix features (e.g. lubrication groove) may differ.
