The dynamic load rating of 32 kN characterises this bearing. The static load rating is 16.2 kN. This variant features increased radial clearance (C3). Interference fit and temperature gradient consume clearance regardless of how the bearing is shielded; the shield only helps decide how large that gradient turns out. This version combines a directional design with an allowance in clearance, and both features act on the same process: the temperature in the rolling contact.
On the closed side a non-contacting shield holds back coarse ingress without contributing a frictional torque; on the open side lubricant from the surrounding space can reach the rolling contact and carry frictional heat away with it. It is precisely this passage that distinguishes the version from a doubly closed, grease-filled variant: the heat leaves the bearing not only through the rings but also with the lubricant, and that changes the temperature gradient between inner and outer ring.
Increased clearance (C3) nevertheless holds an allowance ready, because at such positions several shares typically come together: the interference fit on the shaft, a heat flow supplied from outside and an ambient temperature above that of a free-standing drive. What governs here too is the residual clearance in the warm running state, which should lead neither to a preloaded rolling contact nor to an unnecessarily narrow load zone.
The asymmetry of the design also implies a mounting instruction: the shielded side belongs to the loaded surroundings, the open side to the interior supplied with lubricant, and this assignment is to be recorded in the assembly documents. The gap of the shield holds back neither liquid nor fine dust; where these are to be expected, the sealing belongs in the surrounding design.
Through-hardened standard bearing steel sets the frame for hardness, dimensional accuracy and the ratings listed in the catalogue. Increased radial clearance C3 — Dimensional/form-fit equivalent — verify suffix-level details for critical applications. Matching suffixes are also listed by SKF (HC5C3, HC5C3WT, C3), NSK (C3), NTN (C3) and NACHI (C3).
ManufacturerFAG
Bearing typeDeep-groove ball bearings
Bore d30 mm
Outer Ø D72 mm
Width B19 mm
Dyn. load C32 kN
Stat. load C₀16.2 kN
Weight0.348 kg
Sealsshield on one side
Clearanceradial internal clearance greater than normal
Cagepressed steel cage
Materialstandard bearing steel
Tolerancetolerance class P0/PN (ABEC 1)
Shaft shoulder dₐ37–44.6 mm
Housing shoulder Dₐ59.1–65 mm
Bore typecylindrical bore
€9.57/ pc€14.22−33 %
incl. VAT, plus shipping · price drops with quantity
Lowest price in the 30 days before the reduction: €14.22
In stock
Typically ready to ship in 1–2 days
In stock · ships via DPD, UPS or Deutsche Post
QtyUnit priceDisc.
1 – 4€9.57—
5 – 9€9.28−3 %
10 – 24€9.09−5 %
25 – 49€8.80−8 %
50 – 99€8.61−10 %
4 more for −3% volume discount
From 100 pcs: price and lead time on request – subject to review.
Total (1 pc)€9.57
FAG 6306-Z-C3 Kugellager (30x72x19)
— 30 x 72 x 19 mm
Response within 4 business hours
✓Free shipping over €100 · 14-day returns
✓Purchase on invoice – first order paid before dispatch, then 14-day terms for approved business customers
Same dimensions means the same bearing type and matching main dimensions (d × D × B). Sealing, cage, internal clearance and execution (e.g. material, precision, grease fill) are encoded in the suffix and may differ — please check before ordering. Equivalent additionally means the same sealing, internal clearance and tolerance class; the cage and other suffix features (e.g. lubrication groove) may differ.
