For this NSK bearing, 30x72x19 mm and a weight of 0.35 kg apply; the specification table holds the further technical particulars. This variant features a contact seal and greatly increased radial clearance (C4). A sealed version cannot carry heat away with the lubricant; what prompted the wide clearance class stays in the bearing and meets the elastomer and the grease charge there.
The pairing of a contact seal on both sides with strongly increased clearance (C4) is one of the more demanding combinations in this series, because both features act at the same place. The wide clearance class is selected when tight seats on both rings or a sustained temperature gradient consume a large part of the mounted clearance. The remaining residual clearance permits a greater mutual displacement of inner and outer ring, and it is precisely this movement that is transmitted to the seal: the sealing body fixed in the outer ring has to keep its lip against the shoulder or in the groove of the inner ring under all operating states, so that the design of the seal and the choice of clearance class are not independent of one another.
The second point is thermal: a closed version carries its heat away through the rings and not with a flow of lubricant, so the temperature that prompted the clearance class remains effective inside the bearing — it is to be held against the temperature limit of the sealing material and against the service life of the enclosed grease charge, which cannot be renewed.
Both figures are to be taken from the designation; where the operating temperature lies above them, an open or relubricatable solution is the applicable answer rather than a still wider clearance class. The seal continues to bring a load-independent frictional torque that limits the permissible speed and forms a heat source of its own at the inner ring.
At low radial load it must additionally be checked whether the minimum load is reached, because the load zone turns out narrow at this clearance class. Through-hardened standard bearing steel sets the frame for hardness and dimensional accuracy of the rings.
ManufacturerNSK
Bearing typeDeep-groove ball bearings
Bore d30 mm
Outer Ø D72 mm
Width B19 mm
Dyn. load C26.7 kN(Catalogue value, not verified)
Stat. load C₀15 kN(Catalogue value, not verified)
Weight0.35 kg
Sealscontact seals on both sides
Clearanceradial internal clearance much greater than normal
Cagepressed steel cage
Materialstandard bearing steel
Tolerancetolerance class P0/PN (ABEC 1)
Bore typecylindrical bore
€5.47/ pc
incl. VAT, plus shipping · price drops with quantity
In stock
Typically ready to ship in 1–2 days
In stock · ships via DPD, UPS or Deutsche Post
QtyUnit priceDisc.
1 – 4€5.47—
5 – 9€5.31−3 %
10 – 24€5.20−5 %
25 – 49€5.03−8 %
50 – 99€4.92−10 %
4 more for −3% volume discount
From 100 pcs: price and lead time on request – subject to review.
Total (1 pc)€5.47
NSK 6306 DDUC4 Kugellager (30x72x19)
— 30 x 72 x 19 mm
Response within 4 business hours
✓Free shipping over €100 · 14-day returns
✓Purchase on invoice – first order paid before dispatch, then 14-day terms for approved business customers
Same dimensions means the same bearing type and matching main dimensions (d × D × B). Sealing, cage, internal clearance and execution (e.g. material, precision, grease fill) are encoded in the suffix and may differ — please check before ordering. Equivalent additionally means the same sealing, internal clearance and tolerance class; the cage and other suffix features (e.g. lubrication groove) may differ.
