ZEN S2202-2RS Pendelkugellager (15x35x14)

As a self-aligning ball bearing, this bearing compensates for misalignment and shaft deflection. This ZEN bearing measures 15x35x14 mm and weighs 0.061 kg; the specification table carries the supplementary technical details. This variant features a contact seal and stainless steel. Where two bearing positions cannot be relied on to align, this is the most forgiving of the ball bearing types.

Two rows of balls run on a common spherical outer raceway whose centre of curvature lies on the bearing axis. The inner ring assembly therefore remains free to swivel inside the outer ring: misalignment between positions and the deflection of long shafts are absorbed without edge loading the raceways. The price of that compliance is the shallow conformity of the spherical outer raceway — the contact area is small, load ratings are correspondingly lower than for closely conforming grooves, and only modest axial load is permissible.

The type belongs where alignment error is certain to occur and radial load stays moderate, such as long shafts in pedestal housings and in conveying equipment. The contact seal bears against its counterface and closes the rolling chamber against dust, splash water and wash-out; in return it raises frictional torque and limits permissible speed.

The stainless steel version is intended for damp, wet or chemically loaded surroundings and for applications demanding freedom from rust; its load ratings sit somewhat below those of standard bearing steel. The normal radial clearance recorded corresponds to the standard class and suits ordinary fits and temperature conditions. Contact seals on both sides (rubber lip seal) — Dimensional/form-fit equivalent — verify suffix-level details for critical applications. Matching suffixes are also listed by SKF (2RSH, 2RS1), FAG (2RSR), NSK (DDU), NTN (LLU) and NACHI (2NSE).