ZEN SK005 Insert Bearing (25x47x22.5)
Description
As an insert (Y) bearing, this bearing is located on the shaft and used in a housing. For this ZEN bearing, 25x47x22.5 mm and a weight of 0.1 kg apply; the specification table holds the further technical particulars. This variant features a contact seal and stainless steel. The spherical outer ring is what defines this type — it lets the bearing position align itself as it is tightened.
An insert bearing combines two things: a wide inner ring locked onto a plain shaft, and a spherical outer ring that can swivel in its housing. The position therefore absorbs the alignment error that is unavoidable when mounting to sheet metal, castings or welded frames — the type exists for applications where the surrounding structure offers no raceway quality.
Depending on the version the inner ring is secured by grub screws, an eccentric locking collar or an adapter sleeve; what matters is that the shaft is clean and to size in the seating area, because the ring draws its entire grip from that joint. The swivel is for alignment on assembly, not for running: a misalignment that rotates continuously works the seal and shortens life.
The contact seal bears against its counterface and closes the rolling chamber against dust, splash water and wash-out; in return it raises frictional torque and limits permissible speed. The stainless steel version is intended for damp, wet or chemically loaded surroundings and for applications demanding freedom from rust; its load ratings sit somewhat below those of standard bearing steel.
ZEN SK005 Insert Bearing (25x47x22.5)
— 25 x 47 x 22.5 mm
Response within 4 business hours
